Related Manuals for LG 32LH604B.APH
Summary of Contents for LG 32LH604B.APH
- Page 1 LED TV LH60** (M4 X L20) (M4 X L20) 49/55LH60** 32/43LH60** P/No: MFL69275542 (1602-REV00) www.lg.com Printed in Korea...
- Page 3 32/43LH60** 49/55LH60**...
- Page 4 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT...
- Page 5 H/P OUT OPTICAL DIGITAL AUDIO OUT COMPONENT IN AV IN VIDEO/Y P L/MONO AUDIO R VIDEO/Y P L/MONO AUDIO R...
- Page 6 COMPONENT IN AV IN VIDEO/Y P L/MONO AUDIO R VIDEO/Y P L/MONO AUDIO R VIDEO AUDIO VIDEO L/MONO AUDIO R...
- Page 9 76.3 5.08 4.94 32LH604B-PB 79.4 9.45 9.25 43LH6000-PB 1107 79.4 12.1 11.84 49LH6000-PB 1241 63.0 16.6 16.34 55LH6000-PB...
- Page 13 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69332722* P/NO : MFL69332722 (1602-REV00) Printed in Korea...
-
Page 14: Safety Instructions
Safety instructions Please read these safety precautions carefully before using the product. WARNING Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following environments: • ... - Page 15 Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
- Page 16 Only use an authorized AC adapter and power cord approved by If you install the TV on a stand, you need to take actions to prevent the LG Electronics. Otherwise, this may result in fire, electric shock, product from overturning. Otherwise, the product may fall over, which malfunction or product deformation.
- Page 17 When installing the antenna, consult with a qualified service When connecting external devices such as video game consoles, make technician. If not installed by a qualified technician, this may create a sure the connecting cables are long enough. Otherwise, the product fire hazard or an electric shock hazard.
- Page 18 When moving the product, make sure you turn the power off first. Then, Protect the power cord from physical or mechanical abuse, such as unplug the power cables, antenna cables and all connecting cables. being twisted, kinked, pinched, closed in a door, or walked upon. Pay The TV set or power cord may be damaged, which may create a fire particular attention to plugs, wall outlets, and the point where the cord hazard or cause electric shock.
- Page 19 Preparing NOTE • If the TV is turned on for the first time after it was shipped from the You may find different brightness and color of the panel depending on factory, initialization of the TV may take a few minutes. your viewing position(left/right/top/down).
-
Page 20: Separate Purchase
Separate purchase CAUTION • Avoid touching the screen at all times, as this may result in damage to the screen. Separate purchase items can be changed or modified for quality • Do not move the TV by holding the cable holders, as the cable improvement without any notification. -
Page 21: Mounting On A Table
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 22: Connections (Notifications)
Connections (notifications) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. Connect various external devices to the TV and switch input modes to Separate purchase (Wall mounting bracket) select an external device. -
Page 23: Remote Control
Remote control Adjusts the volume level. (Depending on model) Accesses your favourite programme list. Views the information of the current programme and screen. The descriptions in this manual are based on the buttons on the remote (MUTE) Mutes all sounds. control. -
Page 24: Troubleshooting
• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. LG Electronics will also provide open source code to you on CD-ROM When connecting to the PC (HDMI ), ‘No signal’ or ‘Invalid Format’ is for a charge covering the cost of performing such distribution (such displayed. -
Page 25: Specifications
Specifications • The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country) Wireless module specification - The Energy consumption is measured in accordance with IEC 62087. • As band channels can vary per country, the user cannot change or • ... - Page 26 Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • ...
- Page 28 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
-
Page 29: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 30: Key Codes
KEY CODES key CODeS • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... -
Page 31: Usb To Serial Converter With Usb Cable
(TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals. -
Page 32: Customer Computer
(TV) (PC) EXTERNAL CONTROL DEVICE SETUP (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 33: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 34: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 35 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 36 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 37 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 38 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 39 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 40 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...