Setting Up Hdmi Audio - HP ZBook 14u G6 User Manual

2. Connect the other end of the cable to the high-definition TV or monitor.
3. Press f4
PC screen only: View the screen image on the computer only.
●
Duplicate: View the screen image simultaneously on both the computer and the external device.
●
Extend: View the screen image extended across both the computer and the external device.
●
Second screen only: View the screen image on the external device only.
●
Each time you press f4, the display state changes.
NOTE:
the external device, as follows. Select the Start button, select the Settings icon
System. Under Display, select the appropriate resolution, and then select Keep changes.

Setting up HDMI audio

HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV
to the computer, you can then turn on HDMI audio by following these steps:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select the name of the digital output device.
3. Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click
Playback devices.
2. On the Playback tab, click Speakers.
3. Click Set Default, and then click OK.
to alternate the computer screen image between 4 display states:
For best results, especially if you choose the "Extend" option, increase the screen resolution of
, and then select
Using video 21