Samsung HG32EJ470 Installation Manual page 30

Hospitality Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, Local Set and Picture mode Setup.
− Hotel Plug & Play is available only one time, when the power is first turned on.
− This is available after first setting up the TV and transferring Clone TV data to a USB drive.
− To use Next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
− Depending on the model and region, some menus may not be included.
y UI Scenario
Change the region settings if you are located in North America,
Latin America, or Europe. Your TV might not function if the
region settings are not correctly configured. When the region
settings are changed, your TV will automatically restart to
apply them.
NONE
EU
c
EU_GER
EU_FRANCE
EU_BENELUX
If "Factory
Menu" is
Select your TV installation Type.
selected.
TV Basic Setup
c
Cloning Mode
Factory Menu
Commercial TV Mode
Select your language to start the on screen setup.
c
Auto Tuning completed.
Digital
• TV
• Radio
• Data/Other
Analogue
Select whether to apply daylight saving time.
Clock Settings
Date
Time
Time Zone
DST
If "Commercial TV Mode" is selected in Step A,
the TV will enter RF mode.
If "Interactive(STB)" is selected in Step B, the
Interactive Hospitality Option Menu appears.
30
English
Region Settings
Country List
Bulgaria Croatia
Czech Estonia
Greece Hungary
Latvia Lithuania
Romania Serbia
Slovakia Slovenia
EU-Others
TV Installation Type
Start basic setup to use
your TV.
A If "TV Basic Setup" or "Commercial TV Mode"
is selected.
Menu Language
English
Press the arrow buttons
Eesti
to move around
the screen.
Suomi Press the Enter button to
select.
Français
Deutsch
Auto Tuning
0
0
0
0
0
Change Settings Scan Again
Clock
Set current date and time
Auto
-- / -- / ----
-- : -- --
Auto
Off
-- : --
If "Standalone(Home Menu)" or
"Interactive(STB)" is selected.
Select Solution
Select a solution to install on your TV.
Select if you do not want
c Standalone (Home Menu)
to connect to a specific
solution and only want
LYNK REACH to use the TV.
Interactive(STB)
If "Cloning If "LYNK
Mode" is REACH" is
selected. selected.
Configure your TV
Select your infomation in the categories below.
Select the country that
you're in now
Country Bulgaria
Picture Mode Standard
Auto Tuning
To receive channels, configure the options below
Select the connected aerial
then select Scan. that you want to use to get
channels.
Aerial Terrestrial
Channel Type Digital & Analogue
Scan
Setup Complete！
Your TV is now ready to use.
Done
Clone Settings
Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system
settings from a server.
A USB flash drive is not connected. Please check and try again.
Clone from USB
B
Solution Setup
Set options regarding the selected solution.
Room Number
Group
All
Group ID
Hospitality Mode Standalone System
SI Vendor OFF
Power On
Channel
SI Vendor
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
HP Management
Eco Solution
Logo/Message
Cloning
REACH Solution
Security
1 2 3 4
1 2 3 4 5
Enter the room number.
Only numbers and
English letters can be
entered.