Connecting The Rjp (Remote Jack Pack) - Samsung HG32EJ470 Installation Manual

Output to any external source connected to RJP on the hotel desk.
TV Rear Panel
✎ Availability depends on the specific model.
1. Connect the PC IN /
2. Connect the AV IN [VIDEO]
3. Connect the AV IN [VIDEO]
4. Connect the HDMI IN
5. Connect the RJP port of the TV to the RS/232 port of the RJP.
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610.
y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack, and is a hardware module that has different Audio Video
inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected from
the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function allows hotel guests to
connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source, based on the priority set by the User.
✎ You can select HDMI IN
✎ When the TV is on, connect the TV and the RJP within 10 seconds.
18
English

Connecting the RJP (Remote Jack Pack)

4 HDMI cable
PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
/ [L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV to the HDMI port of the RJP.
or AV IN when connecting the RJP.
RJP Rear
USB HDMI VIDEO AUDIO AUDIO/PC
3 Video Cable
1 D-sub / PC
Audio cable
2 Audio Cable
5