Use Philips Easylink - Philips 32PFL3 6D Series User Manual

DVI-HDMI cable
•
AUDIO IN
LEFT/RIGHT
VGA/DVI
• HDMI cable and HDMI-DVI adaptor
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA cable
•
AUDIO IN
LEFT/RIGHT
VGA/DVI

Use Philips EasyLink

Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control features.
If your HDMI-CEC compliant devices are
connected through HDMI, you can control
them at the same time with your TV remote
control.
DVI
To enable Philips EasyLink, you need to:
• Connect at least two HDMI-CEC
compliant devices through HDMI
• Configure each HDMI-CEC compliant
device properly
• Switch on EasyLink
•
The EasyLink-compliant device must be switched on
and selected as the source.
•
Philips does not guarantee 100% interoperability with
all HDMI CEC devices.
DVI
Switch on or off EasyLink
When you play a HDMI-CEC compliant device,
the TV switches on from standby, and switches
to the correct source.
•
If you do not intend to use Philips EasyLink, switch it off.
1
Press .
2
Select [Setup] > [TV settings] >
VGA
[EasyLink] > [EasyLink].
3
Select [On] or [Off], then press OK.
Use one-touch play
1
After you switch on EasyLink, press play on
your device.
» The TV automatically switches to the
Note
Note
correct source.
EN
29