Hitachi CP-X4020E User Manual page 32

Using the menu function (continued)
To close the MENU, press the MENU button again or select the EXIT and
3.
press the
the dialog will automatically disappear after about 30 seconds.
If you want to move the menu position, use the cursor buttons after pressing the
POSITION button.
Some functions cannot be performed when a certain input port is selected, or
when a certain input signal is displayed.
When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)
cannot be reset.
In the ADVANCED MENU, when you want to return to the previous display,
press the cursor (or the ESC) button on the remote control.
Indication in OSD (On Screen Display)
The meanings of the general words on the OSD are as follows.
Indication
EXIT
RETURN
CANCEL or NO
OK or YES
cursor (or the ENTER) button. Even if you do not do anything,
Selecting this word fi nishes the OSD menu. It's the same as
pressing the MENU button on the remote control.
Selecting this word returns the menu to the previous menu.
Selecting this word cancels the operation in the present
menu and returns to the previous menu.
Selecting this word executes the prepared function or shifts
the menu to the next menu.
Meaning
Operating
23