Boss KATANA-100/212 Mk II Owner's Manual page 7

RECOGNIZED RECEIVE DATA
RX CH
OMNI
PC
#16
BOSTER SW
#17
MOD SW
#18
FX SW
#19
DELAY SW
#20
REVERB SW
CC
#21
EFFECT LOOP SW
#80 GA-FC EXP PEDAL 1 (FX)
#81 GA-FC EXP PEDAL 2 (VOLUME)
#82 EXP PEDAL
#83 GA-FC (FS1)
#84
GA-FC (FS1)
* When you operate the knobs in the EFFECTS section, the settings
of the knobs become effective and the above on/off setting will be
discarded.
USB O port
18
You can use a commercially available USB 2.0 cable to record the
sound of the KATANA Mk II into your computer. You can also use
dedicated software to edit the settings of the internal effects (p. 9).
You must install the USB driver when connecting the unit to
your computer.
Download the USB driver from the Roland website. For details, refer
to Readme.htm which is included in the download.
http://www.boss.info/support/
19
AUX IN jack
Here you can connect a CD player, audio player, electronic musical
instrument, or similar audio source, and listen to it while you play
your guitar.
20
FOOT CONTROL
SEL CH1 CH2/EXP PEDAL jack
If you connect a footswitch (sold separately: FS-6, FS-7, or FS-5L),
you can use your foot to switch between BANK A and BANK B and
CH 1 and CH 2. If you connect an expression pedal (sold separately:
Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H), you can
use your foot to vary the volume.
GA-FC jack
100, 100/212, HEAD only
You can connect the separately sold GA-FC to switch channels and
turn effects on/off.
21
PHONES/REC OUT jack
Connect headphones here. You can obtain powerful guitar sounds
just as if you were playing through the speaker. To adjust the
volume, use the [VOLUME] knob along with the [MASTER] knob.
* If a plug is inserted in this jack, no sound will be output from the
KATANA Mk II's own speaker. This is convenient if you don't want
loud sound to be produced from the speaker, such as when you're
practicing at night.
Connecting a Footswitch
1-4
OFF (fixed)
Connecting a footswitch (sold separately: BOSS FS-6, FS-7, or FS-5L)
1 (00H): BANK A CH1
2 (01H): BANK A CH2
3 (02H): BANK A CH3
4 (03H): BANK A CH4
5 (04H): PANEL
6 (05H): BANK B CH1
7 (06H): BANK B CH2
8 (07H): BANK B CH3
9 (08H): BANK B CH4
Stereo 1/4" phone type
0–63: OFF,
64–127: ON
Stereo 1/4" phone type
FS-6
0–127
RING
0–63: OFF,
64–127: ON
Switch
TIP
RING
* The KATANA Mk II is compatible with latch-type footswitches (FS-6,
FS-7, FS-5L). If you're using an FS-6 or FS-7, set the mode of A and B to
FS-5L (LATCH). Momentary-type footswitches (e.g., FS-5U) cannot be
used.
Connecting the GA-FC
Connect a stereo cable to the GA-FC jack.
* Always use a stereo cable.
* Use cables that do not contain resistors.
GA-FC
Using the GA-FC
You can switch TONE SELECT (CH1–CH4, PANEL). You can also switch
EFFECTS (BOOSTER, MOD, FX, DELAY, REVERB) on/off.
Rear panel
Stereo 1/4" phone type
1/4" phone type x 2
or or
FS-7 FS-5L
TIP RING
RING
TIP
Explanation
Switches between CH1 and CH2.
Switches between BANK A and BANK B.
100, 100/212, HEAD only
Panel Descriptions
TIP
7