Help And Support - Philips HTL1190B Quick Start Manual

English
Important
Read and understand all instructions before you use your product. If
damage is caused by failure to follow instructions, the warranty does not
apply.

Help and support

For extensive online support, visit www.philips.com/support to:
download the user manual and the quick start guide
•
watch video tutorials (available only for selected models)
•
find answers to frequently answered questions (FAQs)
•
email us a question
•
chat with our support representative.
•
Follow the instructions on the website to select your language, and then
enter your product model number.
Alternatively, you can contact Consumer Care in your country. Before
you contact, note down the model number and serial number of your
product. You can find this information on the back or bottom of your
product.
Safety
Risk of electric shock or fire!
Before you make or change any connections, make sure that all
•
devices are disconnected from the power outlet.
Never expose the product and accessories to rain or water. Never
•
place liquid containers, such as vases, near the product. If liquids are
spilt on or into the product, disconnect it from the power outlet
2
HTL1190B_96_QSG_V1.0.indd 2
immediately. Contact Consumer Care to have the product checked
before use.
Never place the product and accessories near naked flames or other
•
heat sources, including direct sunlight.
Never insert objects into the ventilation slots or other openings on
•
the product.
Where the mains plug or an appliance coupler is used as the
•
disconnect device, the disconnect device shall remain readily
operable.
Batteries (battery pack or batteries installed) shall not be exposed to
•
excessive heat such as sunshine, fire or the like.
Disconnect the product from the power outlet before lightning
•
storms.
When you disconnect the power cord, always pull the plug, never
•
the cable.
Risk of short circuit or fire!
For identification and supply ratings, see the type plate at the back or
•
bottom of the product.
Before you connect the product to the power outlet, ensure that the
•
power voltage matches the value printed on the back or bottom of
the product. Never connect the product to the power outlet if the
voltage is different.
Risk of injury or damage to this product!
Never place the product or any objects on power cords or on other
•
electrical equipment.
If the product is transported in temperatures below 5°C, unpack the
•
product and wait until its temperature matches room temperature
before connecting it to the power outlet.
Parts of this product can be made of glass. Handle with care to avoid
•
injury and damage.
4/30/2015 9:52:19 AM