Table of Contents
Advertisement
Specifications
[USB connection]
● This may vary depending on the operating environment.
Video output:
USB Video Class Ver1.0
Video compression format:
Motion JPEG
Audio output:
USB Audio Class Ver1.0
Audio compression format:
Linear PCM, 48 kHz, 16-bit,
2 channels
Transfer modes:
Image
Resolution
1920×1080
JPEG
1280×720
640×360
*
: The frame rate may be lower than the setting depending on the
1
operating conditions.
Supported models:
Devices standardly equipped with a
USB 2.0 compatible port
(continued)
Frame rate*
1
System
System
frequency
frequency
59.94 Hz
50 Hz
30fps
25fps
15fps
12.5fps
5fps
5fps
[Pan‑tilt head unit]
Installation method:
Camera/pan‑tilt head control:
IP connecting
cable
AW protocol
connecting cable
Standard
protocol
connecting cable
*
2
: Use of an STP (shielded twisted pair) cable is
recommended.
Pan/tilt operation speed:
Panning range:
Tilting range:
Quietness:
153
Stand-alone (Desktop) or
suspended (Hanging)
● To ensure safety, the unit must be
secured using the mount bracket
supplied.
When connecting through a hub:
LAN cable*
(category 5 or above),
2
max. 100 m (328 ft)
When using a PoE+ hub:
LAN cable*
(category 5e or above),
2
max. 100 m (328 ft)
When a hub is not used:
LAN cable*
2
(category 5 or above),
max. 100 m (328 ft)
LAN cable*
(category 5 or above,
2
straight cable), max. 1000 m (3280 ft)
Mini DIN 8-pin cable, male
Maximum speed during preset:
300°/s
Maximum speed during manual:
90°/s
±175°
–30° to 90°
● Depending on the pan or tilt
position, the camera may be
reflected in the image.
During preset: NC40 or less
During manual: NC35 or less
Advertisement
Table of Contents
