MSI P55-CD53 Series Manual page 62

▍ ▍
BIOS Setup BIOS Setup
▶ Adjust CPU Base Frequency (MHz)
Ths tem allows you to set the CPU Base clock (n MHz). You may overclock the CPU
by adjustng ths value. Please note the overclockng behavor s not guaranteed.
▶ OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the "Adjust CPU
Base Frequency (MHz)". And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
▶ Start OC Steppng From (MHz)
Ths tem s used to set the ntal base clock. The system wll boot wth the ntal base
clock, and start to overclock from ntal base clock to set base clock that you set n
"Adjust CPU Base Frequency (MHz)" step by step.
▶ OC Step
Ths tem s used to set how many steps for base colck overclockng.
▶ OC Step Count Tmer
Ths tem s used to set the buffer tme for every step.
▶ Adjust CPU Rato
Ths tem allows you to adjust the CPU rato. Settng to [Startup] enables the CPU run-
nng at the fastest speed whch s detected by system.
▶ Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Rato). Read-only.
▶ OC Gene
Ths tem s used to enable/ dsable the OC Gene functon.
▶ Memory-Z
Press <Enter> to enter the sub-menu and the followng screen appears.
▶ DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
▶ Current DRAM Channel1~4 Tmng
It shows the nstalled DRAM Tmng. Read-only.
▶ DRAM Tmng Mode
Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE-
PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng
"Advance DRAM Configuraton" sub-menu to be determned by BIOS based on the con-
figuratons on the SPD. Selectng [Manual] allows users to configure the DRAM tmngs
and the followng related "Advance DRAM Configuraton" sub-menu manually.
3-22