Canon Pixma TS6120 Online Manual page 287

Opening Printer Driver's Setup Screen
3. Click Maintenance tab and Custom Settings.
4. Select Prevent paper abrasion check box and click OK.
◦ For Mac OS:
Adjust the setting to prevent paper abrasion from Remote UI.
Opening Remote UI for Maintenance
If intensity is set high, reduce intensity setting and try printing again.
Check5
If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
• Printing from your computer (Windows)
Check the intensity setting in the printer driver.
Adjusting Intensity
• Copying
Setting Items for Copying
Do not print outside recommended printing area.
Check6
If you print outside the recommended printing area of your paper, ink may stain the lower edge of the paper.
Resize the document using application software.
Print Area
Is platen glass dirty?
Check7
Clean the platen glass.
Cleaning the Platen Glass and Document Cover
Is paper feed roller dirty?
Check8
Clean paper feed roller.
Cleaning the Paper Feed Rollers
Note
• Cleaning the paper feed roller abrades it, so do this only when necessary.
Is inside of printer dirty?
Check9
During duplex printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
• To prevent staining inside the printer, be sure to set the correct paper size.
287