Inter-m NC-600 Operation Manual page 8

NETWORK CONVERTER
4. AUDIO INPUT TERMINAL
It is a terminal for input audio to be transmitted to the network. Use a balanced cable. If using unbalanced
cable, refer to the following image to connect the cable.
XLR JACK
5. AUDIO OUTPUT TERMINAL
It is a terminal for output audio received from the network. Use a balanced cable. If using unbalanced cable,
refer to the following image to connect the cable.
XLR JACK
6. NETWORK (SECONDARY & PRIMARY) CONNECTING TERMINAL
It is a terminal to connect the device to the network. You can control the broadcasting by using integration
※ For more information on how to set up, refer to the integration software manual. Download the manual at
software.
home page. (www.inter-m.net)
ACT
LINK
7. RESET SWITCH
Press the switch for more than 10 seconds to reset the settings of the device.
6 NC-600
XLR
1
2
3