Programming; Programmable Settings - Panasonic KX-TG7842 Operating Instructions Manual

Programming

Programmable settings

You can customize the unit by programming the following features.
To access the features, there are 2 methods.
Handset / Base unit
n Scrolling through the display menus
1
MMENUN
2
Press MCN or MDN to select the desired main menu. a MSELECTN
3
Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN
4
Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
n Using the direct command code
1
MMENUN a Enter the desired code.
Example: Press MMENUN#110.
For available code:
– Handset: see page 36.
– Base unit: see page 42.
2
Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN on the handset or MEXITN on the base unit.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
n Handset
Main menu: "Phonebook"
Operation
Viewing the phonebook entry.
Main menu: "Caller list"
Operation
Viewing the caller list.
Main menu: "Answering device"
Sub-menu 1
Play new msg.
(msg.: message)
36
indicates the reference page number.
Sub-menu 2
For assistance, please visit http://www.panasonic.com/help
Settings
–
Code
#280
Code
#213
Code
– #323
33
49
58