Table of Contents
Advertisement
ELX200 Passive Loudspeakers
Installing the eyebolts
To install the eyebolts, do the following:
1.
2.
Warning!
Eyebolts must be fully seated and oriented in the plane of pull. Always use washers under the
!
eyebolt to distribute the load on the enclosure.
Figure 4.2: Eyebolt shown with washers (A) and without washers (B)
Figure 4.3: Eyebolts shown orientated in the plane of pull (left correct, right incorrect)
Electro-Voice
Remove the three fly point covers from the suspension points.
Install M10 eyebolts and washers into the suspension points.
A
Installation manual
Suspension | en
13
B
2019-04 | 02 | F.01U.326.890
Advertisement
Table of Contents
