Table of Contents
Advertisement
•
[Auto standby]: Enable or disable auto standby. If enabled, the player switches to
standby after 30 minutes of inactivity (for example, in pause or stop mode).
•
[VCD PBC]: Display or skip the content menu for VCD and SVCD.
Note
•
If your preferred language is not available for disc language, audio or subtitle, you can
select [Others] from the menu options and input 4-digit language code which can be
found at the back of this user manual.
•
If you select a language which is not available on a disc, this player uses the default
language of the disc.
Advanced options (clear memory...)
1
Press
.
2
Select [Setup] > [Advanced] to access the advanced setup options.
•
[Downmix mode]: Control 2-channel stereo audio output.
•
[Software update]: Select to update software from USB storage device.
•
[Version information]: Display the software version of this player.
•
[Restore default settings]: Reset this player to the default settings made at the
factory, except for password and parental control level.
•
[Clear memory]: Remove some Blu-ray disc data (such as BonusView) that
are automatically copied on the connected USB device. A "BUDA" folder is
automatically created to store some necessary data from Blu-ray disc.
•
[DivX
VOD Code]: Display the DivX
®
code for this player.
Note
•
Before you purchase DivX videos and play them on this player, register this player on
www.divx.com with the DivX VOD code.
3
Update software
Before you update the software of this player, check the current software version:
•
Press
, and then select [Setup] > [Advanced] > [Version information], and
press OK.
EN
10
registration code or the deregistration
®
Advertisement
Table of Contents
