Handover - LG 49UH7F Owner's Manual

50

Handover

PC1: The PC where the client currently connected to your Signage device is running.
PC2: The PC you want to connect to the Signage device connected to PC1
On PC2
1
Run the Client and search for the Signage device on the same network.
2
From the list of the Signage devices found, select the one connected to PC1.
On PC1
1
When the hand over request pop-up appears on PC2, select whether to approve or deny the request.
2
If you approve the request for hand over, the Signage device will be disconnected, and the Client on PC2 will be
connected to the Signage device.
3
If you deny the request for hand over, the Signage device will remain connected, so you can continue to use the
features of LG Presenter.
No. Item
1 Request for
Handover
1
When there is a Client currently connected to your Signage device and the Client from
another PC requests to connect to the same Signage device, you can determine whether
to approve the request.
Description