Converting And Playing Back 2D Images As 3D - Panasonic HC-V700M Owner's Manual

Advanced (Playback)
Converting and playing back 2D
images as 3D
You can connect this unit to 3D compatible TV, convert the scene and still pictures recorded
in 2D (conventional image) to 3D and play back.
¬ Change the mode to
AVCHD scene, or set to
: [VIDEO SETUP] or [PICT. SETUP]# [CONV. 2D TO 3D] # [ON]
MENU
[ON]: Convert and play back the images recorded in 2D as 3D images.
(3D scenes are played back as 3D)
[OFF]: Recorded images are played back as it was recorded.
Setting with the Touch Menu
1
Touch .
≥ This is not displayed when playing back the iFrame or MP4
scenes.
2
Play back the scene or the still picture by touching it.
≥ Setting for the [3D PLAYBACK] is not possible when [CONV. 2D TO 3D] is set to [ON].
≥ [CONV. 2D TO 3D] setting takes priority regardless of the [3D PLAYBACK] setting.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes/still pictures converted to 3D images cannot be saved as 3D images.
∫ Adjusting 3D effect of the 3D image
It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for better view.
1
Play back the scenes or still pictures recorded in 3D.
2
Touch .
≥ Playback disparity adjustment bar is displayed while displaying in 3D.
3
Touch /
≥ Playback disparity adjustment bar will disappear after approx.
5 seconds without any touch operation.
≥ The setting is canceled in following cases:
j If you stop playback
j If you turn the unit off
j If you change the mode
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
108
VQT3Y41
and touch the play mode select icon. Then, select the
. (l 37)
to adjust settings.
MENU