Whirlpool WPWADREW91501 Installation Instructions Manual page 12

CODE
SPECIAL PRICE DAY
9. 10
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection for that
particular day (9.10). A number followed by
an 'S' indicates selected for that day (9.1S).
Day of week (1–7) can be chosen by pressing the
HOT button. Press the COLD button once to select
special pricing for each day chosen.
When exiting set-up code '9.', the display must show
current day of week:
DISPLAY DAY OF WEEK
10 Day 1= Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
g Press the WARM button once to advance
to next code.
A. 00 VAULT VIEWING OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the COLD button once for this
selection. When selected, the money and/or cycle
counts will be viewable (if counting is selected)
when the coin box is removed.
g Press the WARM button once to advance
to next code.
b. 40 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number
of nickels: 05 = $0.25.
By pressing the HOT button, there is an option
of 1–199 nickels.
With coin slide activation, this represents the total
vend price in nickels. Example: b.40 is equal to
$2.00.
Press the WARM button once to advance
g
to next code.
VALUE OF COIN 2
C. 20
C. 20 This represents the value of coin 2 in number
of nickels: 20 = $1.00.
C. 05 By pressing the HOT button, there is the option
of 1–199 nickels.
g Press the WARM button once to advance
to next code.
d. 00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Replacement of meter case
will be needed for coin slide mounting.
d. 00 Not Selected 'OFF'.
12
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
d. CS Selected 'ON'.
NOTE: This option needs to be set to '00' unless the
meter case has been changed to accept a coin slide
device.
Press the COLD button 3 consecutive times for this
selection. When coin slide mode is selected, set 'b.'
equal to value of vend price in nickels. Set '6 XX'
(REGULAR CYCLE PRICE) and '3.XX' (SPECIAL
CYCLE PRICE) to number of slide operations.
NOTE: If the installer sets up 'CS' on a coin drop
model, the washer will not register coins inserted.
g Press the WARM button once to advance
to next code.
E. 00 ADD COINS OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount.
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'.
Press the COLD button 3 consecutive times for this
selection.
PR MODELS ONLY: In enhanced debit mode, this
option is not selectable.
g Press the WARM button once to advance
to next code.
F. 00 ENHANCED PRICING OPTION
F. 00 Not Selected 'OFF'.
F. SU Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing extra
money. Set-up codes 'H.' and 'h.' will be displayed
only when this option is enabled. Press the COLD
button for this selection.
Press the WARM button once to advance to next
g
code.
SUPER CYCLE UPGRADE PRICE
H. 01
(Skipped unless Super Cycle pricing is enabled.)
H. 01 This represents the number of coin 1 required to
upgrade a base cycle to a Super Cycle. Advance
from 0–33 by pressing the HOT button.
g Press the WARM button once to advance to next
code.
h. 01 SUPER CYCLE TYPE
(Skipped, unless Super Cycle pricing is enabled.)
h. 01 This represents the Super Cycle upgrade option.
Press the HOT button to step through upgrade
options 1 through 3 as follows:
01 – enhanced wash, extra 3 minutes of wash tumble
in addition to the programmed wash time.
02 – extra rinse for all cycles.
03 – both 01 and 02.
Press the WARM button once to advance to next
g
code.
EXPLANATION