Table of Contents
Advertisement
2.3
Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:
1.
Have the front of the monitor face down on a table.
2.
Remove the rubbers in the four screw holes. (Figure 1)
3.
Remove the base (Figure 2).
4.
Pry the rear hinge cover (Figure 3).
5.
Use a screwdriver to remove the four screws on the hinge (Figure 4), then
remove the hinge.
•
•
•
•
2-2
Figure 1
Figure 3
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand while removing the screws.
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
1
2
Figure 2
Figure 4
Chapter 2: Setup
Advertisement
Table of Contents
