No Signal Image - LG LX33 Series Installation Manual

NO SIGNAL IMAGE

(* Only for LX5**S series)
y Image shown may differ from your TV.
y
Installation Menu (V 3.0)
LG Hotel Mode Setup
TV Manager
Password Change
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
No Signal Image
No Signal Image
Welcome Video
S/W : 00.02.00.01 Micom : 0.00.32
y This feature allows you to display an image you have stored on the TV instead of the LG Cube when
there is no signal due to DTV signal attenuation, external device failure, or cable removal.
1 Select No Signal Image with the
2 No Signal Image
y Enables or disables No Signal Image.
y
3 Mode
y Select Original, Fit, or Full Mode as the mode for No Signal Image.
y
- Original: displays the original size of the image stored on your USB storage.
- Fit: displays the image at a size that fits the aspect ratio of the TV.
- Full: displays the image at a size that fits the full screen of the TV.
4 Slide Time
y Select 5, 10, 15, or 20 seconds to display the selected image.
y
NOTE
Only images in a JPG file format can be downloaded and displayed.
y
The size of the images to be downloaded should not exceed 10 MB. You can select multiple
y
images to download.
For best results, the resolution of the images downloaded should be 1920*1080 (FHD) or smaller.
y
For detailed information about downloading images, go to TV Manager > Ez Download.
y
No Signal Image
No Signal Image
Mode
Slide Time
Previous
OK
and buttons and then press the OK button.
NO SIGNAL IMAGE
Enable
◄ ►
Full
5
OK
35