Usb Cloning - LG LX33 Series Installation Manual

4 Select a list to download and press the z button.
5 Select the EPK option (software update) and then use the green and yellow buttons to download either
SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if
selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the
existing Splash image will be deleted.
6 When you are fi nished with your selections, use the (->) button to select Apply and then press OK.
7 Wait for the download to complete. When it is fi nished, your TV will be turned off.
NOTE
y If the DZM file is still in the USB after the download is complete:
y
- An Ez Download pop-up window will appear and list the file types, such as TLL, LOGO, EPK,
NOSIG, MOV with the previously downloaded lists checked automatically.
y If the global TLL and model TLL files exist in the same USB root directory, then only the global TLL
y
will be shown.
If the global TLL has been deleted, then the model TLL will be shown.

USB Cloning

An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the
same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel
Map. This newer procedure significantly decreases the installation time that would be necessary if the
standard RS-232C method were used instead.
Introduction
1 Overview USB Cloning Procedure
y Commercial TVs have the capability to support cloning internal TV data and programme information
y
with an external clone device called "USB Cloning", in order to copy TV data accurately and quickly.
The clone internal functions use slightly different internal processes for the two types of commercial
TVs. However, the UI of cloning feature remains the same in both. Regarding the demands over the
current cloning feature for quicker clonin g, better portability and etc, we would like to announce the
cloning process via USB port, named as USB Cloning. USB cloning process is divided into 2 main
processes. One is writing the previously saved TV data into the TV, and one another is reading
of current TV data into USB memory card. To avoid any confusion due to the words, it is clearly
specified as "Receive from USB" and "Send to USB" in the whole process.
Ez Download (USB Port1)
Ez Download (USB Port1)
[TLL] GlobalClone00001.TLL
[LOGO] 1024X768.jpg
[EPK] M1A_DVB_CN_RevNo1539_v00.00...
[NOSIG] 1360X768.jpg
[NOSIG] Nosignallmage.jpg
[MOV] welcome vdieo.avi
Previous
[ TV Software Version ]
Current : 00.02.00.01
EPK : 00.02.00.02
[ Forced Update Option ]
SPI Boot
LG Boot Logo LG Boot Logo LG Boot Logo
[ No Signal Image ]
Max Size : 10240KB
Total size : 5000KB
Apply
OK
19
TV MANAGER