Sony VPL-SW526C Operating Instructions Manual page 38

Taskbar
Projector connected to computer.
Projector not connected to computer.
Calibration Auto/Manual
Calibration aligns the points where the pen
(Main and Sub) is pointing and where the
projector displays the cursor on the screen.
"Calibration Auto" allows you to execute the
calibration automatically.
38
Using the Interactive Function
Toolbar
Main Pen toolbar
a Calibration Auto
b Calibration Main
c Calibration Sub
Click "Calibration" to select "Calibration
Auto." The calibration starts automatically.
Note
Observe the precautions noted below during the
calibration.
• Avoid placing obstacles between the
interactive detector and the screen.
• Do not move the projector and the screen.
If Calibration Auto does not calibrate properly,
try the following methods.
• Shield the screen from strong, direct outside
light.
• Reduce the ambient light while Calibration
Auto is performed.
• If Calibration Auto still does not calibrate
properly after reducing the lighting as
suggested above, click "Calibration Main"
and "Calibration Sub", then calibrate
manually.
a
b
c