Tool Specifications - Jet JAT-930 Operations & Parts Manual

Tool specifications

Model number
Stock number
Wheel size
Cutting capacity metal
Horsepower
Free speed
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Speed setting
Grip
Spark guard
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6 JAT-930 Cut-off Tool
JAT-930
505930
3 dia. x 3/8 thk (in).
3/4 in.
1/2
22,000 RPM
4 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2.2 m/s 2
105 dB(A)
variable
Inline
Metal, 360-deg. rotating
7-5/16 in. (185.74 mm)
Aluminum
1.98 lb (0.90 kg)
2.27 lb (1.03 kg)