Save Setting To...(User Mode Only) - Acer ET322QK User Manual

9. Hotkey Assignment: Select the function of shortcut key 1(Modes, Brightness, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes,
Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,PIP/PBP).
-----------------------------------------------------------------------------------------------------------
Note: Hot Key 1 and Hot Key 2 can't repeat the same function.
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
11. HDMI Black level setting.
12. Quick start mode: Select Off or On. Turn on to speed up boot speed.
Information
Information
Main Source
DP In
Resolution
1920x1080
H/V Frequency
H:66Hz V:60Hz
Mode
Normal
Series Number
MN53035032682016TPV888
Reset ALL Settings
Exit
Move OK

Save Setting to...(User mode only)

Picture Mode: Standard
Color
Mode: ECO
Audio Mode: Graphic
Gaming
Mode: Move
OSD
Mode: User
System
Save setting to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3. Save Setting to some mode: There are three user-defined profiles available. When you
have decided what settings suit you, save them and system will be able to recall the
settings in the future when you turn on these mode.
Mode - User
Information
Main Source Sub Source
DP In HDMI 2.0
Resolution Resolution
1920x1080 1920x1080
H/V Frequency H/V Frequency
H:66Hz V:60Hz H:66Hz V:60Hz
Mode
Normal
Series Number
MN53035032682016TPV888
Reset ALL Settings
Exit
Move
OK
X