LG HLT55W Owner's Manual page 16

16 Installation
Setting an ID of wireless subwoofer
When the unit is manufactured, the ID is
already set. If an interference occurs or you
use a new wireless subwoofer, an ID should be
set again.
1. Press HOME (
2. Use I / i to select the [Setup] and
press ENTER ( ). The [Setup] menu appears.
3. Use U / u to select [AUDIO] option then
press i to move to the second level.
4. Use U / u to select the [Connecting
Speakers] option then press ENTER ( ) to
3
move to the third level.
The [Wireless Speaker Connection Guide]
appears.
5. Press PAIRING button on the subwoofer.
- If you see the blue LED indicator light,
pairing was successful.
6. Use U / u to select the [5.1 Speaker Setup]
and press ENTER ( ) for wireless speaker
connection test.
HLT55W-F2_DSGPLL_ENG_9781.indd 16
).
NOTE
• If you operate main unit then wireless subwoofer
(rear speakers) sound within a few seconds in
standby mode.
• Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
• Optimum performance can be implemented
only when the unit and the Wireless subwoofer
within distance of 2 m (6 ft.) to 10 m (32 ft.) is
used since communication failure may occur if
longer distance is used.
• It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer to
communicate with each other.
2010-10-13 5:57:10