Tool Specifications - Jet JAT-821A Operations & Parts Manual

Tool specifications

Model
Stock number
Stroke length
Chisel included
Blows per minute
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
Sound level 2
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1 All testing and specification are performed at 90 psi.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
JAT-821A, Flux Chipper
505822
1-1/8 in.
Wide angle type
4600
3 CFM
1/4 in. NPT
3/8 in.
1
90 psi (621 kPa)
10.2 m/s
104 dB(A)
Variable speed throttle lever
Inline
15 in. (380 mm)
Steel
4.53 lb. (2.05 kg)
4.89 lb. (2.22 kg)
2
JET 5