Table of Contents
Advertisement
Tool specifications
Model number
Stock number
Stroke length
Chisel included
Blows per minute
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
JAT-821 Pneumatic Flux Chipper
JAT-821
505821
7/8 in.
Wide angle type
4600
3 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
10.2 m/s
104 dB(A)
Variable speed throttle lever
Inline
14-1/2 in. (368.3 mm)
Steel
4.54 lb. (2.06 kg)
4.89 lb. (2.22 kg)
Advertisement
Table of Contents
