Philips MG5735 Manual page 17

Thorough cleaning
Cleaning the nose trimmer
4 Clean the cutting element and comb under a
warm tap.
5 Carefully shake off excess water and let all parts
air dry completely.
1 Turn off the appliance and disconnect from the
wall socket.
2 Wipe the handle of the appliance with a dry
cloth.
3 Remove any comb or cutting element from the
appliance.
4 Remove any hairs that have accumulated in the
hair chamber with the cleaning brush supplied.
5 Remove any hairs that have accumulated in the
cutting elements and/or combs with the
cleaning brush supplied.
6 Clean the cutting elements under a warm tap.
7 Clean the combs under a warm tap.
8 Carefully shake off excess water and let all parts
air dry completely.
Clean the nose trimmer immediately after use and
when a lot of hair or dirt has accumulated on the
nose trimmer head.
1 Rinse the nose trimmer head with hot water.
2 Turn on the appliance and rinse the nose
trimmer head once more to remove any
remaining hairs. Then turn off the appliance
again.
For a thorough clean, immerse the nose trimmer
head in a bowl with warm water for a few minutes
17
English