Table of Contents
Advertisement
2.3
Connecting the cables
Connect the cables as the following instructions:
•. To.connect.the.power.cord:
a.
Connect the power adapter securely to the monitor's DC input port.
b.
(1) Connect the power adapter to a power outlet.
(2) Connect one end of the power cord to the power adapter and the
other end to a power outlet.
•. To.connect.the.VGA/DVI.cable:
a.
Plug one end of the VGA/DVI cable to the monitor's VGA/DVI port.
b.
Connect the other end of the VGA/DVI cable to your computer's VGA/
DVI port.
c.
Tighten the two screws to secure the VGA/DVI connector.
•. To.connect.the.audio.cable: connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.4
Turning on the monitor
Press the power button
power indicator
2-2
(1)
(2)
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
or
DVI
VGA
AUDIO
Chapter 2: Setup
Advertisement
Table of Contents
