SETUP AND INSTALLATION
5.
Click "Properties".
6.
Type in the IP address and Subnet mask, then press "OK".
7.
Press the "Menu" button on the projector.
Open on projector Network > LAN.
8.
9.
Enter the following connection parameters:
±
DHCP: Off
±
IP Address: 192.168.0.100
±
Subnet Mask: 255.255.255.0
±
Gateway: 192.168.0.254
±
DNS: 192.168.0.51
10.
Press "Enter" to confirm settings.
11.
Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12.
In the Address bar, input the projector's IP address: 192.168.0.100.
13.
Press "Enter".
The projector is setup for remote management. The LAN / RJ45 function displays as follows:
53
English