Table of Contents
Advertisement
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
5. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing or longer if printing. Then try cleaning the print head again. If quality still does not improve,
contact Epson.
Parent topic:
Print Head Cleaning
Related tasks
Checking the Nozzles Using a Computer Utility
206
Advertisement
Table of Contents
