Table of Contents
Advertisement
Chapter 12
•
To enable or disable the wireless function:
1. Go to
Wireless
or
Advanced
2. The wireless function is enabled by default. If you want to disable the wireless function
of the router, just untick the
all the wireless settings will be invalid.
•
To change the wireless network name (SSID) and wireless password:
1. Go to
Wireless
or
Advanced
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note: If you change the wireless settings with a wireless device, you will be disconnected when the settings are
effective. Please write down the new SSID and password for future use.
•
To hide SSID:
1. Go to
Wireless
or
Advanced
2. Select
Hide
SSID, and your SSID won't display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
•
To use the Smart Connect function:
The Smart Connect function lets you to enjoy a more high-speed network by assigning
your devices to best wireless bands based on actual conditions to balance network
demands.
1. Go to
Advanced
>
2. Enable
Smart
Connect.
3. Keep the default values or set a new SSID and password, and click SAVE. This SSID
and password will be applied for the 2.4GHz and 5GHz wireless networks.
•
To change the security option:
1. Go to
Advanced
>
2. Select an option from the
the default settings unless necessary.
In addition
•
Transmit Power
- Select either High,
The default and recommended setting is High.
•
Channel Width
- Select a channel width (bandwidth) for the wireless network.
>
Wireless
Enable
checkbox of each wireless network. In this case,
>
Wireless
Network Name (SSID)
>
Wireless
Wireless
>
Wireless
Settings.
Wireless
>
Wireless
Settings.
Security
drop-down list. We recommend you don't change
Middle
Customize Your Network Settings
>
Wireless
Settings.
>
Wireless
Settings.
and customize the password for the
>
Wireless
Settings.
or
Low
to specify the data transmit power.
65
Advertisement
Table of Contents
