Sleep Mode; Setting The Current Time; Timer Setting - LG HSN12SV Owner's Manual

Operating Instructions

Sleep Mode

1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically.
2. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times.
The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air conditioner.
3. • (In case of non-Inverter Model)
Make sure the sleep mode LED lights up.
To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the sleep mode LED lights off.
• (In case of Inverter Model)
Make sure the Timer LED lights up.
To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the Timer LED lights off.
NOTE
• The sleep mode will operate indoor fan at slow speed in cooling mode and at medium speed in heating mode for
pleasant sleep.
• Art Cool and Art Cool Wide (non-Deluxe) close the lower discharge partially in sleep mode for pleasant sleep.
In cooling mode or healthy dehumidification mode:
The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (2°C in 1 hour) for a
comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning.

Setting the Current Time

1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries,
you should press the RESET BUTTON to reset the time. Press the Start/Stop button.
2. Press SET/CLEAR button for 3 second.
3. Press the TIME SETTING BUTTONS until the desired time is set.
4. Press the SET/CLEAR BUTTON.
NOTE
Check the indicator for A.M. and P.M.

Timer Setting

1. Make sure to set current time correctly on the display of the remote controller.
2. Press the ON/OFF TIMER BUTTONS to turn timer on or off.
3. Press the TIME SETTING BUTTONS until the desired time is set.
4. To set the selected time, press the SET CLEAR BUTTON aiming the remote controller at the
signal receptor.
To cancel the timer setting
Press the SET CLEAR BUTTON aiming the remote controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)
NOTE
Select one of the following four types of operation.
AM
Delay off timer
* Press the TIMER ON or TIMER OFF for check time is set.
14 Room Air Conditioner
SET
CLEAR
SET
CLEAR
AM
Delay on timer Delay on and off timer
TIMER
ON OFF
AM
TIMER
ON OFF
SLEEP
SET
CLEAR
SET
CLEAR
SET
CLEAR