Care And Maintenance; Warranty Disclaimer; Service And Support - Hama FC-10 FABRIC Operating Instructions Manual

Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do
not try to repair them yourself.
• Put your terminal device on the inductive charger (B) with the back to the charger.
• Charging starts as soon as an effective induction eld has been generated.
• Constant illumination of the blue LED ring (2) around the charger indicates that the
device is charging. For the rest of the charging procedure, the brightness of the LED ring
automatically decreases considerably to avoid a disturbing glow during the night.
• The current charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device's battery is fully charged.
• When charging is complete, the LED indicator switches back to the red status LED (2).
• Remove your terminal device from the inductive charger and disconnect the charger from
the power supply.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.

7. Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
4