Connecting To A Network - Denon Professional DN-7000AVP User Manual

Playing Audio from the Zone 2 Outputs
You can simultaneously play back the same audio
source in both the Main Zone and Zone 2.
1. Press Zone On/Off to turn on the Zone 2 power.
2. Press Zone Select to map Zone 2 to the desired
source input.
3. Play back your audio source.
Note: It is not possible to play digital input signals using the HDMI, Coaxial, or Optical input for Zone 2.

Connecting to a Network

You can play music files stored on a computer or from
Internet radio stations via your network (LAN).
Required equipment:
•
Broadband Internet connection
•
Modem
•
Router: We recommend using a router equipped
with a built-in DHCP server and a built-in 100BASE-
TX switch. When connecting multiple devices, we
recommend a switching hub with a speed of 100
Mbps or greater.
•
Ethernet cable (CAT-5 or greater recommended):
Use only a shielded STP or ScTP LAN cable.
When adjusting network settings manually, confirm
the settings with your network administrator.
Do not connect the Ethernet cable from DN-700AVP
directly to the LAN port/Ethernet connector on your
computer.
1. Connect your Ethernet cable from DN-700AVP to
your network.
2. Turn on DN-700AVP. DN-700AVP will connect
automatically on networks with DHCP.
Playing Network/Media Server Files
1. If DN-700AVP is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Multimedia as the source, select Media Server using the  or 
buttons, then press Enter or ►.
3. Press the  or  buttons to select the server, then press Enter or ►.
4. Use the  or  buttons to select the file, then press Enter or ►.
Playback will begin once buffering reaches "100%".
10