Table of Contents
Advertisement
OVER SCAN
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
S-VIDEO inputs only
ON
OFF
OPTION SETTING
OPTION POWER
1
AUDIO*
INTERNAL PC*
1
OFF WARNING
AUTO OFF
START UP PC
FORCE QUIT
120Hz
(not adjustable)
RESPONSE IMPROVE
(not adjustable)
TOUCH PANEL
(not adjustable)
RESET
FACTORY RESET
*1: This function depends on which option board you use.
Some video formats may require different scanning modes in order to best display the image.
Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
Image size stays within the display area. The whole image is displayed on the screen.
NOTE: When you use a computer with HDMI out, please set "OFF".
Allow the monitor to supply power to Option board slot during power save mode or standby
mode.
NOTE: This function should be set to ON when using power save management by slot 2 type
option.
Selects sound input signal according to slot2 type option's specifi cations. To activate DIGITAL,
select OPTION(D) for input signal and OPTION for AUDIO INPUT.
NOTE: DIGITAL is activated only when OPTION(D) is selected for input signal and OPTION for
AUDIO INPUT.
The function is available for slot 2 type PC.
If OPTION POWER is OFF, a warning message appears when monitor power is turned off.
Note: Warning message does not appear when monitor power is turned off by OFF TIMER
setting or SCHEDULE setting.
Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save
mode.
NOTE: Monitor power is not automatically "ON" when connected PC is ON.
When ON is selected, connected PC start-up.
When ON is selected, it performs force-quit PC.
Please use this function only when the operating system cannot be shut down manually.
Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING, START UP PC
in OPTION SETTING and FORCE QUIT in OPTION SETTING.
All items are returned to factory shipment state.
NOTE: You can reset all items in all daisy chain displays. Please be careful to avoid resetting all
items inadvertently.
English-28
ON
-
OFF
ANALOG
OFF
OFF
NO
NO
-
-
-
-
-
Advertisement
Table of Contents
