Lenovo V130 User Manual page 29

How can I determine whether the Windows running on my computer is Compact enabled?
Compact technology is normally enabled on copies of Windows 10 Update running on SSD (or
eMMC) -only computer models. To check your computer,
1
Right-click the Start button in the lower-left corner and select Disk Management.
2
The Disk Management program starts.
If Compact is labeled on the Windows partition, Compact is enabled on your copy of Windows.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, first check the installation
program on the C partition of your hard disk (for select models, on the D partition). If you
cannot find the drivers for all the hardware devices that you need there, download the drivers
from the Lenovo consumer support website.
Note: The Lenovo support Web site contains the latest drivers.

BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is ROM-based software. It communicates basic computer information and
provides options for setting boot devices, security, hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1
Shut down the computer.
2
Press the Novo button and then select BIOS Setup.
How can I change the boot mode? (on select models)
There are two boot modes: UEFI and Legacy Support. To change the boot mode, start the BIOS
setup utility and set boot mode to UEFI or Legacy Support on the boot menu.
When do I need to change the boot mode? (on select models)
The default boot mode for your computer is UEFI mode. If you need to install a legacy Windows
operating system on your computer, you must change the boot mode to Legacy Support. The
legacy Windows operating system cannot be installed if you don't change the boot mode.

Always-on power
What is always-on power?
If a connector on your Lenovo computer is labeled with an "always-on" icon, the connector is
able to provide power to connected devices when the computer is powered off, in sleep or
hibernation mode. This feature can be enabled or disabled in the BIOS setup utility.
Note: If the computer is not connected to ac power and the remaining battery power is very low, the
"always-on" connector stops providing power to connected external devices.
23
Chapter 4. Troubleshooting