Table of Contents
Advertisement
TL-WN821/TL-WN822N/TL-WN823N
3.2.2.2. Enter a PIN into your AP device
1.
Open TWCU and click WPS tab. Select Enter the PIN of this device into my access
point or wireless router. In the field beside PIN, you will see the PIN value of the adapter
which is randomly generated. Click Connect to continue.
2.
Open your router's Web-based Utility and click WPS link on the left of the main menu. Then
click Add device and the following figure will appear. Enter the PIN value of the adapter in
the empty field beside PIN and then click Connect.
3.
When Connect successfully appears on the screen, the WPS configuration is complete.
Or you can view the adapter's utility page to see whether the connection has been
successful as shown in Figure 3-18.
300Mbps Wireless N USB Adapter
Figure 3-15
Figure 3-16
Figure 3-17
16
Advertisement
Table of Contents
