TP-Link TL-WN823N Quick Installation Manual

Quick
Installation
Guide
300Mbps Mini Wireless N USB Adapter
MODEL NO. TL-WN823N
7106506493 REV5.0.0
1
Connect to a Computer
Insert the adapter into a USB port on your
computer directly.
For Mac OS X
2 3
Install Driver and Utility Join a Wireless Network
a. Insert the CD. Option 1:
Note: You can also download the driver and utility at
http://www.tp-link.com.
a. Click
Browse the CD, go to TL-WN823N > Mac OS
b.
X Driver, unzip the Mac OS X version.zip file
b. Select your Wi-Fi network and enter the Wi-Fi
and run the Installer.
c. Follow the wizard to complete the installation.
SHELL
Installer.pkg uninstall.command
Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup (WPS)
(TP-LINK Wireless Configuration a. Press the WPS button on your router.
Utility) on the menu bar.
b. In 2 minutes, press and hold the WPS button on
the adapter until the WPS progress screen appears.
password when prompted.
Fri 5:14 PM
USB-WiFi: On
Turn USB-WiFi Off
TP-LINK_XXXX
TP-LINK_0001
TP-LINK_0903
c. When you are prompted "WPS Protocol Finished",
TP-LINK_TEST_Device
click OK.
Join Other Network
WPS
Open Wireless Utility