Shoes Wash - LG WD-SR1310M Owner's Manual

H ow to use washer
Use this function when you want to wash
slippers or shoes.
1. Press the Power button
• Insert the laundry and close the door.
• Refer to page 15 for the amount of
detergent.
2. Press the Wash button to
select Shoes Wash
• If you selected shoes wash course shoes
wash is lighted.
3. Press the Start/Pause button
• The door will be locked and the water
supply will start to start the washing course.
CAUTION
!
• Wash the insole and string separately in
the washing net. This prevents the string
from being lost.
30

Shoes Wash

NOTE
• Add appropriate amount of detergent
according to the amount of laundry. If you
add too much detergent, the washing time
can be extended or the rinse cycle may not
be done properly.
• The shoes can be shifted to one side during
the spin cycle to extend the spin time.
• One pair of shoes is the recommended for
the wash. (You can wash up to maximum of
6 pairs of shoes.)
• For shoes with strings, it is effective to either
loosen the strings or wash the insole and
strings separately.
• Remove any alien particles from the shoes
as much as possible before washing them.
It can cause a problem to the washer.
• Wash the drum after washing the shoes and
wipe any alien particles inside the drum with
a clean cloth after the wash.
• Shoes with metal accessories can be
damaged.
• Some shoes may not be possible to wash
depending on the fabric of the shoes.