Page 1
Information subject to change as display technology advance. This publication produced by TOVIS Engineering Division. This monitor has been designed and manufactured to deliver high performance video. For continued peak Performance use safe operation, only high quality TOVIS replacement parts or their exact specified Equivalent When servicing.
SAFETY PRECAUTIONS AND WARNINGS Service Warning CRT Warning This display contains HIGH VOLTAGE capable All picture tubes used in TOVIS monitors are of delivering LETHAL quantities of energy. equipped with an integral implosion protection Service should only be attempted by trained system.
Page 3
PERFORMANCE AND OPERATING DATA 1. Power Supply 6. Leakage Current *Power Input: 100VAC ~ 254VAC, 50/60Hz To chassis ground, at 220VAC, 50Hz (Line/Neutral in *Fuse Rating: 250V, 50T 3.15A common) *Power Consumption: - 0.195mA Maximum Size 17” 19” 7. High Pot W(Max) Line/Neutral in common to secondary/chassis, 1500VAC 60Hz for 1 second...
PERFORMANCE AND OPERATING DATA 17. Display Stability for Temperature The temperature is cycled from 25°C to 0°C, and from 25°C to 50°C the video size and centering drift will not exceed 5mm horizontally or 4mm vertically. (Measured after a 20 min. warm-up period at 25°C) 18.
Page 5
USER ADJUSTABLE CONTROLS There are four switches on the control panel. OSD Controls Adjustable controls allow the best display status for : User’s control. individual preferences A. BRIGHTNESS ADJUSTMENT Key Function 1) Press the “MODE” key then Main-Menu OSD come out as below Figure.
Page 6
USER ADJUSTABLE CONTROLS K. COLOR ADJUSTMENT 2) Select the “COLOR” by pressing “SEL” key, then the color Sub-Menu OSD comes out as below Press the “MODE” key then Main-Menu OSD come out figure as below figure. 3) Search “USER” using “UP/DOWN” key (“COLOR1” and “COLOR2”...
Page 7
“COLOR”, “CONTRAST” “RECALL” as item B. “Exit and save” “BRIGHTNESS” have to fix maximum. (It’s a TOVIS’s reference condition.) 2) At the factory mode, search “COLOR” using “UP/DOWN” key. 3) Select “COLOR” by pressing “SEL” key then color sub-menu comes out as top below figure.
TROUBLE SHOOTING CHART NO VIDEO NO POWER NO POWER NO VIDEO CHECK CHECK C101 SIGNAL CABLE AC LEVEL CHECK& CHECK& REPLACEMENT REPLACEMENT F101, SIGNAL CABLE POWER CORD CHECK C104 CHECK IC401 #21,24,26 PULSE DC LEVEL CHECK& REPLACEMENT CHECK IC401 BD101, PFC #23 DC LEVEL &...
Need help?
Do you have a question about the MTG-02XT/XN Series and is the answer not in the manual?
Questions and answers