Table of Contents
Advertisement
Wireless-G Broadband Router
The Administration Tab - Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components.
Ping Test. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test screen.
Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then,
click the Ping button. A successful test will look similar to that shown in Figure 6-35. To stop the test, click the
Stop button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics
screen.
Traceroute Test. To test the performance of a connect, click the Traceroute button. Enter the address of the PC
Figure 6-37: Administration Tab - Diagnostics
whose connection you wish to test and click the Ping button. A successful test will look similar to that shown in
Figure 6-36. To stop the test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close
button to return to the Diagnostics screen.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Figure 6-38: The Ping Test
Figure 6-39: The Traceroute Test
Chapter 6: Configuring the Wireless-G Broadband Router
37
The Administration Tab - Diagnostics
Advertisement
Table of Contents
