Plug Wiring; Handling And Transportation - Beko TAM8202B User Manual

Hide thumbs Also See for TAM8202B:
Table of Contents

Advertisement

3
Information

3.5 Plug Wiring

The moulded plug on this appliance incorporates
a 13 A fuse. Should the fuse need to be replaced
an ASTA approved BS1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the plug must
not to be used until a replacement fuse cover has
been fitted. Colour of the replacement fuse cover
must be the same colour as that visible on the pin
face of the plug Fuse covers are availabe from any
good electrical store.
• Fiting a different plug
• As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals on
your plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
• Green/yellow cable must be connected to
ground (E)
line
• With the alternative plugs a 13 A fuse must be
fitted either in the plug or adaptore or in the
main fuse box. If in doubt contact a qualified
electrician.
Toaster / User Manual
3.6 Storage
• If you do not plan to use the appliance for a long
period of time, please store it carefully.
• Make sure the appliance is unplugged, cooled
down and completely dry.
• Wrap the power cord around the cable coil on
the bottom of the toaster.
• Store the appliance in a cool, dry place.
• Make sure the appliance is kept out of the reach
of children.
3.7 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or the
packaging. The appliance may be damaged.
• Dropping the appliance will render it non-
operational or cause permanent damage.
11 / EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tam8202tTam8202w

Table of Contents