Table of Contents
Advertisement
Picture color
Deep Color recreates the natural world on your
TV screen and displays vivid images in over a
billion of colors.
If your TV supports Deep Color and is
connected to your home theater through an
HDMI cable, you can change the Deep Color.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Video] > [HDMI Deep Color], and
then press
.
4
Select the following options, and then press
:
•
[Auto]: Automatically select HDMI
Deep Color.
•
[On]: View vivid images.
•
[Off]: Display standard 24-bit color.
Picture resolution
For HDMI video settings, connect your home
theater to the TV through an HDMI cable.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Video] > [HDMI Video], and then
press
.
4
Change the HDMI resolution setting, and
then press
.
Blu-ray 3D video
To play 3D video, connect your home theater to
a 3D TV through an HDMI cable.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Video] > [Watch 3D video] >
[Auto], and then press
Subtitle position
Automatically change the position of the subtitles
to fit your TV screen.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Preference] > [Auto Subtitle Shift]
> [On], and then press
.
.
.
.
.
.
Sound
Change the sound settings to suit your preference.
HDMI audio
To enjoy HDMI audio output from your TV,
connect your home theater to the TV through
an HDMI cable.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Audio] > [HDMI Audio], and then
press
.
4
Select the following options, and then press
:
•
[Bitstream]: Enable bitstream output
over HDMI.
•
[Auto]: Automatically select the best
supported audio format.
•
[Off]: Disable audio from the TV.
Audio post processing
To select a predefined sound mode, enable
audio post processing at the speaker (see 'Sound
mode' on page 19).
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Advanced] > [Enhanced Audio] >
[On], and then press
Note
•
To play the original audio of the disc, select
[Off].
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
available for Dolby-encoded DVD and Blu-ray
discs.
1
Press
(Home).
2
Select [Setup], and then press
3
Select [Audio] > [Night Mode] > [On], and
then press
.
.
.
.
.
EN
31
Advertisement
Table of Contents
