Table of Contents
Advertisement
Macintosh OS X Twonky Media (v4.4.2)
1
Visit www.twonkymedia.com to purchase
the software, or download a free 30-day
trial to your Macintosh.
2
Start Twonky Media on the Macintosh.
3
In the Twonky Media Server screen, select
Basic Setup and First Steps.
» The First steps screen is displayed.
4
Type a name for your media server, and
then click Save changes.
5
Back in the Twonky Media screen, select
Basic Setup and Sharing.
» The Sharing screen is displayed.
6
Browse and select folders to share, and
then select Save Changes.
» Your Macintosh rescans the folders
automatically so that they are ready to
share.
Play files from your PC
Note
•
Before you play multimedia content from the
computer, make sure that the home theater
is connected to the home network, and the
media server software is properly set up.
1
Switch your TV to the correct HDMI source
for your home theater.
2
Press
(Home).
» The home menu is displayed.
3
Select [browse PC], and then press
» A content browser is displayed.
4
Select a file, and then press
5
Press the playback buttons to control play.
EasyLink
The home theater supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
•
•
Switch on
1
2
3
4
5
Control devices
Control the home theater and the other
connected HDMI-CEC compliant devices with a
single remote control.
One-touch play
If you enable One-touch play, the TV
automatically switches to the correct channel
when you play a disc in your home theater.
One-touch standby
When you press and hold
remote control, the home theater and all the
connected HDMI-CEC devices (that support
one-touch standby) switch to the standby
mode.
If one-touch standby is enabled on your home
theater, you can switch to standby with the
.
remote control of the TV or other HDMI-CEC
devices.
System Audio Control
.
When you play a device that has its audio
output routed to the home theater, the home
theater switches to the corresponding audio
source automatically.
To use one-touch audio, turn on System Audio
Control and follow the instructions on the TV
to map connected devices to the audio input
connectors of the home theater.
Audio Input Mapping
When you connect a new device to your home
theater, map the device to the audio input
connector (see 'Play audio from home theater'
on page 30).
HDMI-CEC compliant devices.
An HDMI connection between the
connected devices.
Switch on the HDMI-CEC operations on
the TV and other connected devices. For
information, refer to the manual of the TV
or other devices.
Press
(Home).
Select [Setup], and then press
Select [EasyLink] > [EasyLink], and then
press
.
Select [On], and then press
.
.
(Standby) on the
EN
29
Advertisement
Table of Contents
