Turning On The Set; Installation Guide; Programme Selection; Volume Adjustment - LG M2762A Owner's Manual

TURNING ON THE SET

When using the remote control, aim it at the remote control sensor on the SET.
1
Firstly, connect the power cord correctly.
At this stage, the SET switches to standby mode.
■ In standby mode to turn SET on, press the button
on the remote control and the SET will switch on.

INSTALLATION GUIDE

If the OSD (On Screen Display) is displayed on the screen after turning on the SET, you can adjust the
1
Language, Auto Tuning.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. If you close without completing the initial setting, the Instal lation Guide menu can be displayed
again.

PROGRAMME SELECTION

1
Press the ▲/▼ or NUMBER buttons to select a programme number.

VOLUME ADJUSTMENT

1
Press the ◄ / ► button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
2
3
You can cancel the Mute function by pressing the MUTE, ◄ / ►, SSM or I/II button.
on the SET or press the POWER buttons
35