Table of Contents
Advertisement
PREPARATION
SECURING THE SET TO THE WALL TO PREVENT FALLING
WHEN THE SET IS USED ON A STAND (Only M2762A)
■ Image shown may differ from your set.
We recommend that you set up the set close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the set be attached to a wall so it cannot be pulled in a forward direc-
tion, potentially causing injury or damaging the product.
Caution: Please make sure that children don't climb on or hang from the set.
■ Insert the eye-bolts (or set brackets and bolts) to tighten the product to the wall as shown in the pic-
ture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or set brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
!
!
NOTE
► When moving the set, undo the cords first.
► Use a platform or cabinet strong enough and large enough to support the size and weight of the set.
► To use the set safely make sure that the height of the bracket on the wall and the one on the set are the same.
?
?
18
■ Use a sturdy rope or cord (sold separately) to tie the
product. It is safer to tie the rope so it becomes horizon-
tal between the wall and the product.
Advertisement
Table of Contents
