4 Use your Sound Bar
system
Use your Sound Bar with the top panel
or remote control
1
Make sure the Sound Bar is properly connected to the
power supply and sources.
2
Press
remote control to power on the Sound Bar.
➜ The Sound Bar will pair with the subwoofer
➜
automatically. If pairing is not successful, pair
your Sound Bar with the subwoofer manually (see
'Connect your wireless subwoofer to the Sound Bar'
on page 31).
3
Press
remote control to switch to the correct source.
LED behaviors under different source modes
LED indicators
The red LED is on solidly.
The purple LED is on solidly.
The green LED is on solidly.
on the top panel of your Sound Bar main unit or
at the top panel of your Sound Bar main unit or
Source mode
in standby mode
in HDMI ARC mode
in AUX mode
34