Control Locations - LG LP090HED1 Owner's Manual

Packaged terminal air conditioner/heat pump
Hide thumbs Also See for LP090HED1:
Table of Contents

Advertisement

Control Locations

Manual Controls
TEMPERATURE CONTROL
Set the Thermostat control to the desired
temperature mark 5 (the mid-point is a good
starting position). If the room temperature is not
satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as
appropriate.
• VENTILATION
The ventilation lever is located to the lower left side
of the unit.
The ventilation lever must be in the CLOSE position in
order to maintain the best cooling conditions.
When fresh air is necessary in the room, set the
ventilation lever to the OPEN position.
The damper is opened and outdoor air is drawn
into the room.
This will reduce the cooling or heating efficiency.
When the air conditioner has been running and is
turned off or set to the fan position, wait at least 3
minutes before resetting to the cooling operation.
Note:
A slight heat odor may come from the unit
when first switching to HEAT after the
cooling season is over.
This odor, caused by fine dust particles on
the heater, will disappear quickly.
This is harmless.
OPERATION MODE SELECTOR
OFF
Turns air conditioner off.
LOW FAN
Low speed fan operation without cooling.
HIGH FAN
High speed fan operation without cooling.
LOW COOL
Cooling with the low speed fan operation.
HIGH COOL
Cooling with the high speed fan
operation.
LOW HEAT
Heating with the low speed fan operation.
HIGH HEAT
Heating with the high speed fan
operation.
Control Locations
VENT
VENT
CLOSE
OPEN
Owner's Manual 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents