Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SkyZone SKY03S
Summary of Contents for SkyZone SKY03S
- Page 1 SKYZONE SKY03S FPV GOGGLE USER MANUAL Rev1.0...
-
Page 2: System Content
System Content GOGGLE Carry case ... -
Page 3: Function Diagram
Function Diagram 2 ... -
Page 4: Operational Guidance
The two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR system used to support the 2D & 3D display modes are built in the SKY03S FPV goggles. The wireless receiver system can work in the diversity mode to improve the receiving effect. In this mode, the channel and band settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to support... -
Page 5: Voltage Calibration
· When exiting the search menu, the receiver will work on the channel where the triangle indicator is located. RF Racing · The <RF Racing> mode is specially set for the racing. In this mode, the goggels can work only on the eight channels of the Race band. -
Page 6: Front Camera
volume downwards. · Press the button in the MENU status to select the menu downwards. REC Button: · In the RF and AV IN modes, short press the button to record the video, and then short press the button again to stop recording the video. ·... - Page 7 · Automatic recording: The automatic recording function is opened in the system menu. After starting up each time, if the video signal has been detected, the recording function will be activated automatically. The recording function can also manually be stopped in the recording process. ·...
-
Page 8: Led Light
<Tilt> represents the reverse of the channel; and <Pan & Tilt> is reversed in both directions. LED Light · SKY03S has a display window for the LED light. The LED MODE can be set in the system menu. A variety of lighting effects can be selected. -
Page 9: Format Sd Card
· It is recommended to adjust these parameters on the clear image screen. Format SD-CARD · Enter into the system menu to select the Format SD card option; press the <OK> button to enter into the setting state; press the <UP/DOWN> button to select <YES>; and press the <OK> button to execute the formatting operation. -
Page 10: Specifications
Specifications 37 degrees (Diagonal) Resolution 800X600(SVGA) 200cd/㎡ Binocular Luminance Display Interpupillary 57.5 to 69.5mm Adjustable distance (IPD) 3D Display Side-by-Side(half) ISM 5.8GHz 48 Channel, Diversity receiver. Band CH 1 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M 5733M 5752M 5771M 5790M 5809M 5828M...
Need help?
Do you have a question about the SKY03S and is the answer not in the manual?
Questions and answers